Pressure washer home mechanics

[markstanco 12640]

Water is spraying out of the middle port on the pump, but only when the trigger is pressed. Ideas?

[Updawg 2295]

Bad fetzer valve. Use some 3 in 1 oil on it

[NeverMarryAStripper 21996]

If liquid comes out where it's not supposed to, I always assume is a seal or a gasket.

[AustinMT 952]

3 hours ago, Updawg said:

Bad fetzer valve. Use some 3 in 1 oil on it

[HornOnTheBayou 8957]

[EE2B 1565]

When you get it fixed, bring it over and clean my drive way there slappy.

[Lat22 4028]

15 hours ago, NeverMarryAStripper said:

If liquid comes out where it's not supposed to, I always assume is a seal or a gasket.

If you're lucky.

[Kennythetiger 9490]

A vacationing penguin is driving his car through Arizona when he notices that the oil pressure light is on. He gets out to look and sees oil dripping out of the motor. He drives to the nearest town and stops at the first gas station.

After dropping the car off, the penguin goes for a walk around town. He sees an ice-cream shop and, being a penguin in Arizona, decides that something cold would really hit the spot. He gets a big dish of ice cream and sits down to eat. Having no hands he makes a real mess trying to eat with his flippers. After finishing his ice cream, he goes back to the gas station and asks the mechanic if he's found the problem. The mechanic looks up and says "It looks like you blew a seal."

"No no," the penguin replies, "it's just ice cream."

[Deej 77002]

Have your husband take a look at it. 

[RPM 26374]

You obviously ignored the multiple "NO MIX!" warnings. You're on your own now.

[blacklab 11957]

May be a pressure relief valve.

Check to make sure there's not a blockage somewhere.

[markstanco 12640]

In the pump I take it? Don't want to take it apart.

[markstanco 12640]

You obviously ignored the multiple "NO MIX!" warnings. You're on your own now.

Thats for another individual I am married to.

[Judge Roybeanbag 11821]

Not good, Clark.  One of the piston rings/seals is probably bad.  

[markstanco 12640]

Not good, Clark.  One of the piston rings/seals is probably bad.  

I'm mechanically worthy. Easy fix with some sort of rebuild kit?

[Judge Roybeanbag 11821]

8 hours ago, markstanco said:

9 hours ago, Judge Roybeanbag said:

Not good, Clark.  One of the piston rings/seals is probably bad.  

I'm mechanically worthy. Easy fix with some sort of rebuild kit?

Probably if you can find the parts.   Here’s a troubleshooting guide, the piston seals problem looked like what’s happening with yours.

https://www.fix.com/repair/power-tool/pressure-washer/leaks-water/#Piston Seals

 

 

 

[Jkwellborn 6781]

Come on baller. Be like Eazy E and throw it in the gutter and go buy another.

[markstanco 12640]

*anudder